Live data from your tanks, pumps and analyzers — on a dashboard, with alarms when something needs attention.
Your field instruments: 4-20 mA or Modbus outputs.
A local device reads the signal at site and prepares it for transmission.
GSM/4G, LoRaWAN, UHF radio or Ethernet carries it through a gateway to the cloud.
SCADA or cloud dashboard, on desktop or mobile, with SMS/email alarms when a value goes out of limit.
If your site already has working 4-20 mA or Modbus instruments, there is no need to replace them. We add a gateway alongside the existing loops and bring the data online without touching your control system.
Discuss a PilotStart Small
Begin with one tank or one station, then add sites as you grow.
Power and utility consumption collected automatically for reporting.
Tank, reservoir and diesel storage levels visible remotely, with low and high alarms.
pH, chlorine, turbidity and conductivity from online analyzers.
Flow rates, totals and pump run status from remote stations.
Encrypted links and password-protected user access to the dashboard.
Data is buffered at the gateway and sent when the network comes back.
Read-only setup keeps the dashboard separate from your control system.
We check your instruments, signal types, network coverage and power at site.
Gateway, network and dashboard selection, with the panel built and tested in-house.
Installation, loop checks and dashboard and alarm setup.
Ongoing support, with new signals and sites added to the same dashboard.
It's a way to see your field instrument data — tank levels, flow, water quality, pump status, energy use — on a dashboard from anywhere, by connecting a gateway to your existing instruments.
No. We add a gateway alongside your existing 4-20 mA or Modbus loops and bring the data online without touching your control system.
GSM/4G, LoRaWAN, UHF radio and Ethernet/Wi-Fi, depending on network coverage and site conditions.
Yes. Connections are encrypted and dashboard access is password-protected, with a read-only setup that keeps monitoring separate from your control system.
Yes. Most clients begin with a single site or asset, then add more sites to the same dashboard as needed.
Data is buffered at the gateway and sent through once the network comes back, so you don't lose readings during an outage.